Bright White Running Lights - Definitely Gets Attention!
Bright Amber Turn Signals
No Load Equalizer needed
Pre-Wired - 4 easy connections
Comes w/ step-by-step instructions
Also Available in PnP for Sportsters - Click HEREto See
..
DK Custom Introduces Stealth LED Front Turn Signals & Bright White Running Lights
SEE & BE SEEN!
DK's Stealth Universal LED FTS unit is pre-wired with 4 Posi-Lock connectors. Just screw 4 connectors into place, that's it. No cutting, splicing, soldering or taping of wires.
Choice of standard 4.5" long or 5.75" long. The 4.5" work well with fork tubes that are 39mm, for 49mm forks, and fork covers found on Softails & Touring Models, the 5.75" work best.
If you have a 2014 or later, you do NOT need a load equalizer.
If you have a 2013 or earlier, & are running the stock rear turn signals, you do Not need a load equalizer.
If you have a 2013 or earlier, & you're running LED rear turn signals, but keep the stock front turn signals, you do NOT need a load equalizer.
The Only time you need a load equalizer is if you have a 2013 or earlier, And have LED turn signals up front and in back, and do not keep any of the stock turn signals, then you will need a load equalizer, which you can see HERE.
If you wish to keep your stock front turn signals, in addition to the Stealth LED FTS's, you can do that. Just leave them hooked up.
The Stealth LED's work with the 4-way Hazard Lights and alarms, just like the stock lights do.
FITMENT:
All Motorcycles that have a 12 volt system and turn signals, including Dyna, Softail, Touring & Trike Harley-Davidsons.
Plug-n-Play FITMENT: For 1997-Up Sportsters, we have a Plug-n-Play version, seen them HERE.
Check out All the pictures above.
"I really like the look, in the month I've had them, I've received dozens of compliments & questions on where to get them. This is one of the best mods I've done!"-Terry
