- Home /
- Complete HiFlow 828 Air Cleaner System - Harley Sportster Prepped for Ventilator Cover*
Outlaw HiFlow 828
Air Cleaner System
Prepped for Ventilator Cover*
For
Harley-Davidson
Sportster Models 1991-UP
~Complete High Performance System~
~Fits EFI & Carbureted~
MADE in The USA!
DK Custom Products
FEATURES & SPECS:
- HiFlow Genuine K&N Air Filter
- 6" x 9" Oval for Maximum Flow
- Backplate Billet Machine Cut Finish
- Prepped for Ventilator Cover (does not include Ventilator Cover, Read Fitment Note Below)
- External Breather System - EBS (NO dirty air in motor)
- A True Stage I - IV Air Cleaner System
- E-Z Step-by-Instructions Included
- Super Low Profile of 2" Total
- Made in The USA!
This Outlaw HiFlow 828 System will give your Sportster the Air it needs to Produce Maximum Power. CLEAN AIR - No dirty air routed back in! AND, it is one of the Lowest Profile High Flow Intakes available.
*VENTILATOR COVER FITMENT NOTE: The billet cover that comes with this has a threaded hole in the center that allows you to bolt up a Ventilator Cover to it.
Even though you do not typically see a Ventilator Cover on a Sportster, it is relatively easy to acquire a cover and give your Sporty a unique look, along with a 360 degree intake.
This kit DOES NOT include a Ventilator Cover. There are photos of some of the Ventilator covers that will bolt onto this 828 System.
This is Not designed to fit the Ventilator covers that fit the tapered filter elements, like found on most M8's. (see photos)
You can run this 828 with a Ventilator Cover you already have, or you can order a Ventilator Cover from Harley directly, or from a HD Dealership...Just make sure it is a cover that is like those pictured in the photos here...NOT one made for the tapered filter element.
E-Z Installation with Step-by-Step Instructions.
Genuine K&N Filter with Million Mile Warranty.
Filter is re-usable. Simply wash, let dry, & apply oil.
Fits Carbureted & EFI Sportsters 1991-Up.
This is a must for at Stage 1 - IV Upgrades.
Included: Your Choice of Brass, Black or Polished Aluminum Breathers. Or you can choose one of the Hose & Filter or Catch-Can External Breather Systems for venting - To see full details on All these choices Click HERE.
The 6061 Billet Backplate was designed for maximum flow and minimum impact on rider leg clearance, with only 2" from Throttle Body/Carb to Outside Surface of Cover.
When choosing between the Breather systems, it is helpful to know-
1. All the Breather Bolt function the same, it is just a matter of which color you prefer.
2. All the Hose and Filter - Catch-Can EB Systems function the same with the Outlaw Air Cleaners, it is a matter of which system you like the looks of the best.
The Transformer™ is the Ultimate External Breather System, that Doubles as a Support Bracket and can be Transformed into an EPA (Emissions) Compliant System. It fits all Outlaw Air Cleaners.
This Performance Air Intake is CNC cut by DK Custom Products in the USA. This particular Model is for use with a Straight Ventilator Cover. See photos.
This is a Sleeper Mod. Once Installed with a Ventilator Cover, You Cannot See a Visual Difference.
EXCEPT, it is Lower Profile AND It Has Much Better Flow of ONLY CLEAN Air, so
There is A Very Nice Performance Improvement.
This HiFlow Performance 828 Intake System is available with a Variety of Other Looks.
Click HERE to See Them.
See the full spec's on the K&N Filter Element HERE.
You can upgrade to the Outlaw HiFlow 828 Air Cleaner System without doing any dyno work, or adding tuners, IF you leave the stock exhaust in place.
The EPA has required Harley to route dirty, oily crankcase air back into the air cleaner compromising the performance of your engine. The External Breather System vents it without compromising the performance or longevity of your motor.
Caution: Motorcycles modified with this DK Custom Products High-Performance part may not be legal for public highway use in some areas. The user shall determine suitability of this product for his or her use.
"Working on making my 48 have more power and make people take a second look. This checks both of those boxes." -Cuz
Installation Video HERE
Product Tags
Use spaces to separate tags. Use single quotes (') for phrases.
- Scratch & Dent Specials
- Accessories
- Air Cleaner - Intake
- Apparel - Gear - Jewelry
- Coil & Key Relocation
- EFI Tuners
- Electrical
- Engine Upgrades
- Exhaust
- Footpegs
- Frame/Suspension
- GIFTS
- Gas Tank Lift Kits
- Lubrication
- Special Packages
- Tour-Pak Kits
- NEW PRODUCTS
- Reports
- BEST SELLERS
- Sportster Parts
- Dyna Parts
- Softail Parts
- Bagger Parts
- Trike Parts
- Home Reviews
- M8 Softail Parts
- Murdered-Out Mods
- Floorboards
- Floorboard & Footpeg Extensions