A Pair of

Billet 22LR

RUN-BRAKE-TURN LED LIGHTS

DK Custom Products

FEATURES & SPECS:

• Universal Fitment- Will work on any 12 Volt system Motorcycle
• 22LR Light Housings cut from 6061 BIllet Aluminum
• Total of 32 Super Bright Dual Intensity RED LED's
• Run-Brake-Turn Functionality
• Multiple Options for fitment 
• 1.25" Diameter & 1" Long
  
• Polished  Finish, also available in Black finish
• Optional R-B-T Module if you do not already have RBT capability 
• No Load Equalizer needed
• Optional Mounting Brackets
• No Cutting, Splicing or Soldering - E-Z Install
• Comes w/ step-by-step instructions
  

• DK's Billet 22LR LED R-B-T Lights will work with any Motorcycle that has a 12 volt electrical system.  The LED's are super bright for great daytime visibility!

• There are 16 Dual Intensity Red LED's in each housing.  Each waterproof LED cluster sits in housings that are 1.25" in diameter and 1" long.  24" wire length makes for easy install, anywhere you choose.

• The housings are CNC cut from 6061 Billet Aluminum, and have a threaded 3/8" diameter stud for mounting.  

• The outer circumference is hand polished to a mirror finish.  The indentations are machine polished.

• There are optional L brackets and Flat brackets for easy mounting. The L brackets make for easy install on the fender struts (where most factory signals are), or anywhere else you may want.  The Flat brackets make for easy installation off the axle adjuster (see photo). (Flat brackets will require drilling out one hole a bit larger, as outlined in the instructions)

• If you currently have a factory, or aftermarket Run-Brake-Turn module, this Universal 22LR LED pair will operate All Three Lighting Functions.  This include Domestic & International Models!

• If you do not have a RBT Module, there is an Option below to add one to this order.  You can see Full Details (including the Brake Strobe Feature) on the Run-Brake-Turn Module HERE.

• If you do not have a RBT Module, and don't want to get one, the Universal Stealth RBT LED comes with everything needed to perform any One of the following combinations:  

Running & Brake Lights

Running & Turn Signal Lights

Brake & Turn Signal Lights

Comes with all needed hardware & easy step-by-step instructions.  Included Posi-Lock connectors mean NO cutting, splicing, or soldering of wires.  It's never been easier to get Bright LED Rear Lighting!

If you have a 2014 or later, you do NOT need a load equalizer.  

If you have a 2013 or earlier, & are running the stock front turn signals, you do Not need a load equalizer.  

If you have a 2013 or earlier, & you're running LED front turn signals, but keep the rear factory lights, you do NOT need a load equalizer.

 
The Only time you need a load equalizer is if you have a 2013 or earlier, And have LED turn signals up front, And you remove the rear stock lights, then you will need a load equalizer, which you can see HERE. 

 Also available in Black Finish, click HERE to see them.

Matching 22LR All Amber Front Running/Turn Signal Lights available, click HERE to see them.

FITMENT:

Specifically designed for Sportster, Dyna & Softail Models, but will also work on any 12 motorcycle.

Check out All the pictures above.  

"These things are BRIGHT!  A lot of light in a small, sleek package." -Les