Home /
Bagger Parts /
Ultimate Bagger Heat Reduction

Ultimate Bagger Heat Reduction

Choose any combination of the below mods equalling $400 or

more total & Use Coupon Code:

ultred

in Checkout to SAVE $20 on Your Order!

Ultimate Heat Reduction Mods

Felt Heat & Engine Heat

If you're wanting to be more comfortable along with having better performance, simply reducing heat (both felt heat & engine heat) will get you there.

Below are the things that, when combined, will get you the

ULTIMATE BAGGER HEAT REDUCTION

Felt Heat & Engine Heat

Felt Heat-

Engine Heat-

Felt Heat Reduction

Highway Pegs

Benefits:

Get your boots/feet/legs away from the engine
Multiple Foot Positions Available

Simply having highway pegs gives you the ability to stretch your legs out and get them away from the engine heat and exhaust.

Floorboard Extensions

Benefits:

Get boots/feet/legs further away from engine & exhaust

It’s practically a given; extend your floorboards outward and fell less heat, while putting your boots/feet/legs in a more natural, comfortable position.

Passenger Floorboard Relocators

Benefits:

Get boots away from heat
Get thighs off grab handles

These relocators will be a major win with your passenger. With so many variations, you can find the “sweet spot” just right for your passenger. These will get thighs off grab handles, boots away from exhaust, and put your passengers boots/legs/feet in a more natural, comfortable sitting position.

Engine Heat Reduction

Gas Tank Lift

Benefits:

Allows more airflow around top of engine
Plus of less air coming up & around tank, hitting the rider
Plus of easier cleaning of top of engine

Lifting the tank up off of the engine will assist in cooling since less air will be coming up over the tank and will instead be flowing under the tank and around the top of the engine. This will also mean less air hitting the rider and easier cleaning of your motor! It’s a win-win!

Cooling Deflector Wings

Benefits:

Redirects air flow over the engine
Plus of less rider buffeting

Most baffles and deflectors that reduce buffeting actually increase engine temps, and we all know that some Harleys run too hot as it is. With their unique, adjustable design, the Cooling Deflector Wings are a “double wammy”. While they reduce buffeting, they also redirect airflow over the engine for better cooling.

O il Filter Relocation

Benefits:

Puts filter in the wind
Plus of mess-free oil changes

By relocating your oil filter, either mounting it on the downtube (Sportster, Dyna, & Softail) or tucked high and tight under the left side passenger floorboard, it’s now out in the wind and will help in cooling. Plus, there will be no more mess when it’s time to change your oil!

Permanent Oil Filter

Benefits:

Billet housing aids in lower oil temps
7 times more oil flow than paper filters
Cleanable & Reusable

This is the last oil filter you will ever need to buy. Not only is it cleanable, its billet housing fins help lower oil temps via heat dissipation. It also flows much more oil than standard paper filter and its integrated magnet prefilters the oil.

Force Flow Fans

Benefits:

Lowers Head Temps Up to 100*

Doubles As a Horn

Excessive heat and operating temperature can be an engines worst enemy. The patent pending JIMS ForceFlow literally forces the heat away from your engine by pushing high velocity air through the cylinder fin pack in a wide flow pattern, directed at the head gasket surface.

This unique design also relocates the horn inside the ForceFlow’s streamlined housing, and gives the horn mount or “left side” of the bike a much needed new look.

Oil Cooler

It’s a given; oil coolers help cool down the oil and cooler oil/engine means better performance. It’s crucial to performance and engine longevity to cool down your oil. No matter which version you have, oil is the lifeblood of your engine and is subjected to intense heat. It is crucial to performance and engine longevity to cool that oil down. If you have an air cooled twin cam with no factory oil cooler, you can get a side mount(downtube) or a low mount and typically see a 20-40* drop in temps. Using the Secondary/Auxiliary Oil Cooler with its patent-pending cooling bracket (see full details HERE), you can get an even larger drop in temps. Having the lowest possible engine and oil temps will result in the Ultimate Performance!

At DK Custom Products we use Jagg Oil Coolers on our own Bikes, and are happy to make them available to our Customers. The turbulators in each oil passageway gently stir oil, exposing it to more critical heat dissipation surface area for superior cooling with minimal oil pressure restriction.

Why Do We Use & Recommend Jagg Oil Coolers?

HyperFlow Technology is the engineered balance between performance and flow. It should first be described as a "systems" way of thinking.

Air flow, fins, oil flow, turbulators, brazing technology, metal finish, oil filter adapter design, thermostatic actuator, etc., are each components maximized to contribute to the overall system. It is only when each individual component is considered in relation to its contribution to the whole that a true systems approach can be claimed.

Click HERE to read a Full Report on Why & How to reduce engine heat in Twin Cam & M8 Engines.

Choose any combination of the above mods equalling $400 or more total

and use Coupon Code:

ultred

in checkout to SAVE $20 on Your Order!