- Home /
- Complete HiFlow 425 Air Cleaner Carbon Fiber Harley Twin Cam
Outlaw HiFlow 425
Air Cleaner System
CFL FINISH
For
Harley-Davidson
Touring~Softail~Dyna Twin Cam Models
~Complete High Performance System~
~Fits EFI & Carbureted~
MADE in The USA!
DK Custom Products
FEATURES & SPECS:
- HiFlow 4 1/4" Genuine K&N Air Filter
- Super Low Profile - best leg clearance
- Support & Backplate Black Powder Coat Finish
- Carbon Fiber Look Face Plate Cover
- Your Choice of External Breathers (NO dirty air in engine)
- All Hardware needed, including Stainless AND Brass Acorn
- E-Z Step-by-Instructions Included
- Made in The USA!
Give your Bike a Different Look....One that gets Double-Takes as people walk by it!
How is the CFL achieved?
First, each part is prepped, then it is painted black. Next each part is hand-dipped, using the Hydrographics procedure, to get the Carbon Fiber Film on the part. Finally, each part receives a Durable Clear Coat Finish.
Because each part is hand-dipped, by a human being, each part is a unique one-off piece. There can be small variances in the finish and lines. Only surfaces that are visible on the part when it is installed have the CFL, and the fiber lines curve with the curves in the metal.
Note: The CFL finish is very difficult to photograph. Because of the unique refractive qualities of the CFL, the look varies depending on light source and angle
The Outlaw HiFlow 425 System will give your Twin Cam the Air it needs to Produce Maximum Power. CLEAN AIR - No dirty air routed back in!
This system is TURN-KEY. It comes with everything needed to replace the restrictive stock air cleaner.
Check out the Dyno Chart. This little Monster shows off your motor AND flows More air than a 103 CI can eat!
E-Z Installation with Step-by-Step Instructions.
Genuine K&N Filter with Million Mile Warranty.
Filter is re-usable. Simply wash, let dry, & apply oil.
Fits Carbureted & EFI Touring, Softail, & Dyna Twin Cam Models.
This is a must for at Stage 1 Upgrade.
Included: Your Choice of Brass, Black or Polished Aluminum Breathers. Or you can choose one of the Hose & filter Breather Systems for venting - The Traditional, the Discrete, or the Premium Discrete To see full details on All these choices Click HERE.
When choosing between the 6 Breather systems, it is helpful to know-
1. All three Breather Bolt function the same, it is just a matter of which color you prefer.
2. All three of the Hose and Filter Breathers function the same with the Outlaw Air Cleaners, it is a matter of which system you like the looks of the best.
The Transformer™ is the Ultimate External Breather System, that Doubles as a Support Bracket and can be Transformed into an EPA (Emissions) Compliant System. It fits all Outlaw Air Cleaners.
This System comes with a Carbon Fiber Look Finished Face Plate Cover.
You can upgrade to the Outlaw HiFlow 425 Air Cleaner System without doing any dyno work or adding tuners IF you leave the stock exhaust in place.
This kit comes with both a Stainless and a Brass Acorn Fastener for the Cover.
There are Optional A/C Cover Fasteners that you can add to your order.
44 Magnum, The Gripper, Tri-Speed, Speed, Tri-Shield and Mini-Tri-Shield. Any of these will add to Your Bikes Unique Look.
Fitment:
2000-2015 Softail (cable operated throttle)
2016-UP Softail (Throttle by Wire TBW)
2000-Up Dyna (cable operated throttle)
2000-2007 Touring (cable operated throttle)
2008-Up Touring (Throttle by Wire TBW) The 425 will NOT fit, the 587 will.
If you have a 2008-Up Touring Model or a 2016-UP Softail, it has Throttle by Wire (TBW) and the Outlaw HiFlow 425 will NOT fit. The Outlaw HiFlow 587 WILL fit. (it is not a matter of air flow, Throttle by Wire throttle body that is incompatible with the 425.
If you have a 08-Up Touring Model and would like to hide the Ugly TBW Servo Motor CLICK HERE for a selection of Servo Covers.
The EPA has required Harley to route dirty, oily crankcase air back into the air cleaner compromising the performance of your engine. The Outlaw Breathers vents it without compromising the performance or longevity of your motor.
Caution: Motorcycles modified with this DK Custom Products High-Performance part may not be legal for public highway use in some areas. The user shall determine suitability of this product for his or her use.
"Another DK Custom first,the CFL Look, I love it!" -Jay
Product Tags
Use spaces to separate tags. Use single quotes (') for phrases.
- Scratch & Dent Specials
- Accessories
- Air Cleaner - Intake
- Apparel - Gear - Jewelry
- Coil & Key Relocation
- EFI Tuners
- Electrical
- Engine Upgrades
- Exhaust
- Footpegs
- Frame/Suspension
- GIFTS
- Gas Tank Lift Kits
- Lubrication
- Special Packages
- Tour-Pak Kits
- NEW PRODUCTS
- Reports
- BEST SELLERS
- Sportster Parts
- Dyna Parts
- Softail Parts
- Bagger Parts
- Trike Parts
- Home Reviews
- M8 Softail Parts
- Murdered-Out Mods
- Floorboards
- Floorboard & Footpeg Extensions