Outlaw HiFlow 828

Air Cleaner System

For

Harley-Davidson
Dyna~Softail~Touring~Trike Twin Cam Models

~High Performance Air Cleaner~

~Prepped for Ventilator Cover*~

 ~Fits EFI & Carbureted~

MADE in The USA!

DK Custom Products

FEATURES & SPECS:

• HiFlow Genuine K&N Air Filter
• 6" x 9" Oval for Maximum Flow 
  
• Backplate Billet Machine Cut Finish
  
• Prepped for Ventilator Cover (does not include Ventilator Cover, Read Fitment Note Below)
• Choice of Support Brackets
• Naked - No Cover - OEM Ham Cam Sporty Cover Fits
  
• Your Choice of External Breather System - EBS (NO oily air in engine)
• A True Stage I Air Cleaner
• E-Z Step-by-Instructions Included
  
• Super Low Profile of 2" Total
• Made in The USA!

The Outlaw HiFlow 828 System will give your Twin Cam the Air it needs to Produce Maximum Power.  CLEAN AIR - No dirty air routed back in! AND, it is one of the Lowest Profile High Flow Intakes available

*VENTILATOR COVER FITMENT NOTE: The billet cover that comes with this has a threaded hole in the center that allows you to bolt up a Ventilator Cover to it. 

This kit DOES NOT include a Ventilator Cover.  There are photos of some of the Ventilator covers that will bolt onto this 828 System.  

This is Not designed to fit the Ventilator covers that fit the tapered filter elements. (see photos)

You can run this 828 with a Ventilator Cover you already have, or you can order a Ventilator Cover from Harley directly, or from a HD Dealership...Just make sure it is a cover that is like those pictured in the photos here...NOT one made for the tapered filter element.

E-Z Installation with Step-by-Step Instructions.

Genuine K&N Filter with Million Mile Warranty.

Filter is re-usable.  Simply wash, let dry, & apply oil.  See Filter Service Care Kit HERE.

Fits Carbureted & EFI Dyna, Softail, & Touring Twin Cam Models.

This is a must for at Stage 1- IV Upgrades.

 You can upgrade to the Outlaw HiFlow 828 Air Cleaner without doing any dyno work or adding tuners IF you leave the stock exhaust in place.

Replace the Restrictive stock air cleaner on your Twin Cam and wake it up!

The 6061 Billet Backplate was designed for maximum flow and minimum impact on rider leg clearance, with only 2" from Throttle Body/Carb to Outside Surface of Cover.

Included: Your Choice of Brass, Black or Polished Aluminum Breathers.  Or you can choose one of the Hose & Filter Breather Systems for venting- The Traditional or the Discrete.  To see full details on ALL these choices Click HERE.

When choosing between the 6 Breather systems, it is helpful to know-

1.  All three Breather Bolt function the same, it is just a matter of which color you prefer.

2.  All of the Hose and Filter or Catch-Can  Breathers function the same with the Outlaw Air Cleaners, it is a matter of which system you like the looks of the best.

The Transformer™ is the Ultimate External Breather System, that Doubles as a Support Bracket and can be Transformed into an EPA (Emissions) Compliant System. It fits all Outlaw Air Cleaners.

The EPA has required Harley to route dirty, oily crankcase air back into the air cleaner compromising the performance of your engine. The Outlaw Breathers vents it without compromising the performance or longevity of your motor.

This Performance Air Intake is CNC cut by DK Custom Products in the USA.  This particular Model is for use with a Straight Ventilator Cover.  See photos.

This is a Sleeper Mod.  Once Installed with a Ventilator Cover, You Cannot See a Visual Difference. 

EXCEPT, it is Lower Profile AND It Has Much Better Flow of ONLY CLEAN Air, so

There is A Very Nice Performance Improvement.

This HiFlow Performance 828 Intake System is also available in a Variety of other Looks.  Click HERE to See Them.

Fitment:

2000-2015 Softail (cable operated throttle)

2016-Up Softail (Throttle by Wire TBW)

2000-Up Dyna (cable operated throttle)

2000-2007 Touring (cable operated throttle)

2008-Up Touring (Throttle by Wire TBW)

If you have a 2008-Up Touring Model, or a 2016 Softail, it has Throttle by Wire (TBW) and you must check the TBW option above to get the correct backplate.

 **This Air Cleaner System comes with a Support Bracket.  If you already have an aftermarket support bracket for your cable operated bike,  you may click the box above and save $22.  

If you have a Throttle-By-Wire bike, you have a black Support Bracket already and you may click the box above and save $22.

Look at our Support Brackets HERE.

Caution:  Motorcycles modified with this DK Custom Products High-Performance part may not be legal for public highway use in some areas.  The user shall determine suitability of this product for his or her use.

"This Air Cleaner Kicks-Ass.  It is low profile, has an External Breather and I can run my Ventilator Cover on it! -Randy