Customer Reviews

Quality
Value

Awesome product Review by Hades
Bought this as I was relocating the coils and like the low tucked look of this mount. Its a little tight on my 2011 Sportster forty-eight but works perfectly. (Posted on 4/13/2023)

Quality
Value

VERY HAPPY RIDER Review by Sparky
Everything just as DK said. VERY HAPPY with all 3mods coil-ignition relo and plug wires. I will be ordering again. 2 thumbs up (Posted on 3/28/2023)

Quality
Value

What a difference Review by theshedvtwin
Did a DK three inch tank lift which is the best mod I've made to my 09 Nightster. But I liked the ignition up front and didn't opt for the relocation. Big mistake. My nice clean look up front was interrupted by that ugly bracket along with the ignition switch and key just hanging in space. If you lift, you're gonna wanna relocate. (Posted on 3/10/2023)

Quality
Value

Nice upgrade Review by Kevin P
Relocation kit offers different options on where you can mount it. New push button is a perfect fit. Very easy install. Works great. Arrived ahead of schedule even with the Christmas rush. Very pleased (Posted on 1/6/2023)

Quality
Value

21 iron 883 Review by Oscar
Quick and easy. Kind of weird at first but pretty obvious when you sit by your bike. I had an ignition coil relocation set up but I was having my keys sawed off. This seems to be fixing that issue so it works for what I wanted it for. Also looks great. (Posted on 9/20/2022)

Quality
Value

Very pleased Review by Catfish
I installed this along with a 2 1/2 inch tank lift on my 2009 nightster along with the ignition relocation very pleased with the product good quality cleaned up the bike nice would highly recommend (Posted on 8/15/2022)

Quality
Value

Nice Review by Relo ignition on a 92 sporty by Joe
Installed the relo action bracket behind the primary , low down with the key facing up. Tucked up and out of the way. It cleaned up the area between the jugs. Easy install and super fast shipping. (Posted on 2/8/2022)

Quality
Value

f-6 doesnt fit with cover installed Review by Kenny
didnt fit my 18 iron 1200 with wiring/connector cover installed behind cylinder, sat to high and didnt like position, easy to make new bracket if position you want is not desired but used behind coil relocation bracket after drilling holes and using nut on the top coil bolt (Posted on 7/18/2021)

Quality
Value

Good product Review by Pablo
Awesome product it's an easy install would definitely recommend this (Posted on 4/24/2021)

Quality
Value

coil relocation Review by bilge
what can I say but excellent product! very nicely made and looks and works perfect with the flex six key relocation it changed the look of my 48 completely for the better, thanks DK ! (Posted on 8/27/2020)

Quality
Value

Great Price, Well Built Review by Steve
Easy install, much more sturdy than the aftermarket relocation mount I replaced. (Posted on 7/28/2020)

Quality
Value

P e r f e c t Review by Paul
Gets the ignition out of the craphole Harley made over the engine, and experienced riders get to search for it when they hop in the saddle. (Posted on 7/3/2020)

Quality
Value

One of the slickest aesthetics! Review by GurtSquirt
The ignition is one more thing I wanted to relocate away from the cluster of crap Harley threw together and placed over the engine. Get that crap out of there, and donut right with DK Custom's kit. (Posted on 7/3/2020)

Quality
Value

Easy to Relocate Review by Simple
I was actually able to move it to where it's not going to be behind me. It's now actually right under me and you really can't see it which is good for outsiders. (Posted on 7/1/2020)

Quality
Value

2003 883C ignition relocation Review by Steve S.
Good product! Needed to drill a mounting hole in the battery box to mount it though. The instructions included were not for my specific model but Dwayne in customer service responded to email immediately and helped me out. (Posted on 6/16/2020)

Quality
Value

Good product. Glad I didn't have to make it from scratch. Review by Richard
Honestly, this thing was dumb easy to install on my '16 883n.
Yes, you could make it all yourself, but this is right and tested and install ready, looks nice and works. I don't know about you, but I have a lot of stuff I need to make by hand. Glad I could just buy and bolt. (Posted on 6/4/2020)

Quality
Value

Great Equipment, Great Value Review by Coach G
If you're looking to open up your bike with an ignition relocation, I think the flex-6 option is amazing. Sure its a little lower, but it keeps the mechanism off your motor, and limits vibration. The installation is a tad tricky and takes some patience but is pretty simple. Word of advice is to check which way you want the mount facing, at first I wanted it tucked in but it refused to fit with the cover. The second I flipped the mount to tucked out, everything just fell in to place effortlessly, all I had to do then was loctite and tighten. (Posted on 3/19/2020)

Quality
Value

Check your bike first and cross reference instructions Review by David
I have an '03 XL883 sportster

The metal product is great and if you can use it, it is a great buy. Although some creative individuals would argue, the price is not worth it for a bracket someone can make on their own or weld.

CHECK YOUR BIKE! My bike does not have a ground behind my primary making this bracket for me completely useless. I tried to use the bracket and attach it to my battery box somehow but it was starting to be a big pain to even incorporate it. So needless to say, I did not use it and I just drilled a hole on my battery bracket and placed the ignition above my primary between the batter and rear cylinder.

I wish I could send the bracket back and ask for my money but hopefully this review will help someone avoid buying something that truly may not need.

So check your bike and what you have first and use the instructions on the site to find out if you may run into the same issue as me and then make the appropriate decision from there.

*******

Good point to check your bike and the instructions-

Excerpt from instructions (full instructions with photos can be seen at this link- http://www.dkcustomproducts.com/media/wysiwyg/coilkeyrelo/sportster/f6/REV.41016Flex-SixKeyrelocationInstructions.pdf )

If you have a 2002 or earlier sportster, you will not have the grounding stud
mentioned in step #5. If this is the case, you have a few options.
○ 1. You can get a longer bolt that comes out of the back of the primary
and use it the same way.
○ 2. You can mount the flex- six where the rear tank bolt is, which puts
the ignition right above the rear rocker cover and in front of the seat
for easy access.
○ You can mount it to the battery tray like in the picture below. Some
model sportsters already have a hole to accommodate this, others
might need to drill a hole.
○ The flex-six can be mounted just about anywhere there is a bolt.
This is a chance for you to get creative.

DK Support Team (Posted on 1/14/2020)

Quality
Value

Quality product excellent service Review by Dan
Very happy with this product. Well made, fits perfectly, clear and easy to follow instructions. Service and communication were excellent. Wouldn’t hesitate to buy again from D.K. Customs! (Posted on 7/17/2019)

Quality
Value

great customer service Review by scott
This bomb-proof part will last a lifetime. Install was easy and straight forward. Check out you tube if you have any doubts. Really cleaned up under my tank without a lift. Customer service is top-notch too! (Posted on 6/8/2019)

Quality
Value

Perfect! Review by Coffey
The kits from DK are flawless. Instructions are easy to understand, the fit and finish are perfect. My sportster XL1200NS looks so much better now. Did the wire tuck, tank lift, coil relocation, and ignition switch relocation. All supplies from DK and now people compliment the bike everywhere I go. Honestly I can’t recommend this company enough. Seriously easy install, great instructions, absolutely superior quality. (Posted on 6/4/2019)

Quality
Value

Well made parts at a good price Review by Kevin
Parts are well made and the instructions are written very well. (Posted on 5/23/2019)

Quality
Value

Thumbs up all around! Review by Justin
First off, the day after I placed my order I emailed the guys at DK to ask if I could edit my order. They were very helpful and offered zero hassles.

High quality products, easy install, and cleans up the look of the bike drastically! Highly recommend! (Posted on 5/1/2019)

Quality
Value

Coil +ignition relocation and 1.5 inch tank lift kit Review by Dennis P
Quality products!!..DK Customs provide more than enough info on how to install, and they get the product to your door quick...as I get more ideas for my 2017 48...these guys will be my go to (Posted on 4/29/2019)

Quality
Value

Ignition relo Review by Chris S
Easy install really cleans up the front of the bike Alot more practical spot for ignition (Posted on 1/11/2019)

Quality
Value

Looks sweet easy to install Review by Wilbur
Easy clean up for your bike (Posted on 12/26/2018)