Your Choice of a Aluminum or Black Vented Screw Top 4 Stage Catch Can
Includes 6 feet of hose for maximum flexibility in filter placement
All needed hardware (including a Brass & Black T-Connector) ... use whichever one matches your Bike Best
Turn-Key System
Optional Black Fiber or Stainless Steel Braided Hose
Optional Hose Clamps & Covers
E-Z Install ~ Step-by-Step Instructions Included
An External Breather System (EBS) is preferred with any Air Cleaner System. This allows for only clean cool air to go into the air cleaner and engine, increasing performance and engine longevity.
This kit will work with ALL OUTLAW HiFlow Air Cleaners and many other aftermarket Stage 1 Air Cleaners*.
The EPA has required Harley to route hot, dirty, oily crankcase air back into the air cleaner compromising the performance of your engine. This vents it without compromising the performance and longevity of your motor.
With this breather system you will experience a slight performance increase. This is because engines like Cold, Dry, Oxygen Rich air!
When ordering, Choose a Machine Cut Aluminum Finish or a Black Powder Coat Finish.
The Machine Cut Billet Aluminum Finish that can be polished to a Mirror Finish.
The top of the Catch Can is attached to the hose by a zip tie or hose clamp (both supplied w/ the kit). The bottom of the Catch Can threads to the top.
Anytime you want, you can un-screw the can portion, empty out all the gunk, and then thread it back together.
The top of the Catch Can is vented, letting the air escape, while the 4 Stage Filtration catches and holds the oil.
The Catch Can is 1 1/2" in diameter and 2 5/8" tall. For more details on 4 Stage Catch Can, Click HERE.
E-Z Install
Fits Most Sportsters 1991 & Up (except XR1200)
Fits Big Twin Evo's
FITMENT:
*Fits ALL Outlaw Air Cleaners. For aftermarket A/C's, If your air cleaner system utilzes a support bracket that is no thicker than 1/4", this will fit.
There are Optional Black Fiber & Stainless Steel Braided Hose & Black or Chrome Hose Clamp Covers, and blacked-out hose clamps if you prefer that look to the Black Hose and plain hose clamps or zip ties.
Caution: Motorcycles modified with this DK Custom Products High-Performance part may not be legal for public highway use in some areas. The user shall determine suitability of this product for his or her use.
Working great so farReview by Josh L
Finally got sick of wiping oil off the side of my bike. Found this website in a Google search and it seemed like the best option. So far so good! It was fairly easy to install, instructions were pretty good, and it’s working out perfectly so far. My only complaint would be the spacers seem pretty cheap. They feel like plastic. Everything else is so heavy duty, and then the spacers just feel like they won’t last very long. We’ll see though. I hope they hold up. (Posted on 9/29/2021)
Quality
Value
Great CanReview by Sardonicus
The can works as it should and is well made, screws together nicely without binding or cross threading or being rough. The only thing is, the banjo fittings that come with it seem cheap and chintzy, though I am sure they're plenty strong enough, they just have a molded plastic look to them. Not that it matters, I re-used the banjos and banjo bolts from my Screamin' Eagle air cleaner anyway so I wouldn't have to worry about making spacers because of how it mounts.
Used it on an Evo with my SE air cleaner, only thing I had to do was get a different tee fitting (6mm + 6mm + 10mm) because the SE banjos take a smaller hose than the ones that come in the kit (kit banjos is 3/8 hose and SE banjos take 1/4" or 6mm). That's not the fault of DK though, I chose to go with different banjos than the kit. Banjo bolts that came in it seem good though. That's the only negative I have about it is the banjos seem cheap. (Posted on 5/14/2021)
Quality
Value
Great CanReview by Sardonicus
The can works as it should and is well made, screws together nicely without binding or cross threading or being rough. The only thing is, the banjo fittings that come with it seem cheap and chintzy, though I am sure they're plenty strong enough, they just have a molded plastic look to them. Not that it matters, I re-used the banjos and banjo bolts from my Screamin' Eagle air cleaner anyway so I wouldn't have to worry about making spacers because of how it mounts.
Used it on an Evo with my SE air cleaner, only thing I had to do was get a different tee fitting (6mm + 6mm + 10mm) because the SE banjos take a smaller hose than the ones that come in the kit (kit banjos is 3/8 hose and SE banjos take 1/4" or 6mm). That's not the fault of DK though, I chose to go with different banjos than the kit. Banjo bolts that came in it seem good though. That's the only negative I have about it is the banjos seem cheap. (Posted on 5/14/2021)
Quality
Value
5 STARS!!!Review by Richard Siggers
I am a complete beginner when it comes to working on my bike and this was super easy and is a great looking and working product (Posted on 5/13/2021)
Quality
Value
Very fit to my 2018 XL1200CX Review by dalsan Yoo
Bought this with the premium catch can black. The hose length is long enough, every components' quality is perfect.
Fast shipping. (Posted on 12/22/2020)
Quality
Value
Excellent ProductReview by Wrench
Bought this with the premium catch can kit and paired it with the 425 air cleaner and skull cover emblem. Looks awesome and feels good knowing there’s no longer a hot spit of oil being shot into my combustion chamber (Posted on 9/15/2020)
Quality
Value
Great ProductReview by Ken W
Bought this along with the Outlaw 636v air cleaner. Works as described by keeping the hot oily mess out of the intake. Catch can is well made, and match's my washable oil filter perfectly. (Posted on 9/9/2020)
Quality
Value
Great ProductReview by Ken W
Bought this along with the Outlaw 636v air cleaner. Works as described by keeping the hot oily mess out of the intake. Catch can is well made, and match's my washable oil filter perfectly. (Posted on 9/9/2020)
Quality
Value
Great ProductsReview by Ian G
I bought this along with a Stealth air cleaner support bracket.
It was shipped to Scotland and arrived ahead of schedule.
Great service all round.
Thanks to all
(Posted on 8/20/2020)
Quality
Value
Perfect fitReview by Sean
Fast delivery- everything was in the box ready to go. Laid it all out and went nice and slow- no issues and nice fast install. Back up and running in under 2 hours. Can feel the oooomph in 2nd and 3rd...... (Posted on 5/6/2020)
Quality
Value
Premium Catch Can EBS Breather System Harley Sportster & BT EvoReview by Oscar Crespo gutierrez
It was easy to install on my Iron 883 and fits perfectly. I love this DK product. My Iron goes increably fine and you can sense the extra power . Good price and quick delivery, happy customer! . i would like the breather bolts black DK. Congratulations DK !!!! (Posted on 4/5/2020)
Quality
Value
She's a SpitterReview by Chops
Originally went with breather bolts but quickly found out my bike (some are worse than others) is a spitter, the breather bolts had to go. The black catch can and hardware provide a clean look, wish the banjo bolts and fittings were black (Guy's?) but the chrome goes well with my chrome air cleaner cover. Good price and quick delivery, happy customer!
Thanks Dev and Kev. (Posted on 8/26/2017)
Product Tags
Use spaces to separate tags. Use single quotes (') for phrases.
